Every machine we are building.
Explore every equipment area and system. Integration is a design aim; each page identifies development status, model assumptions and targets. Pictures are engineering model renders from Autodesk Fusion: concept designs, not photographs.
Tote storage
Stores totes on magnetic floors with two central one-way lanes per level and four independent loop units serving four pick ports.
- 1,152 places, 8 levels, 2 one-way lanes per level
- 4 loop lift units, 2 per end; 32 active floor carriers
- Target 600 totes/h per port
Pallet storage
Stores EUR pallets four deep beside two central one-way lanes per level, with two independent lift units at each end; each unit has two pallet spaces.
- 1200 × 800 mm pallets, 6 levels, 2 one-way lanes per level
- Robots charge from a floor rail
- 4 independent lift units; system rate to qualify
Conveyors & sorting
Moves and sorts parcels, reading labels on all six faces.
- 2 m/s, 3,000 parcels/h in the model
- Swivel diverter, 30° left or right
- Six-sided scan tunnel, exception lane
AMRs & AGVs
Moves totes, carts and pallets between stations.
- 10 AMRs + 2 AGVs in the model
- One-way lanes, hold lines at crossings
- Target 8 h run, 15 min top-up
Robotic picking
A robot arm with vision picks items from tote to tote.
- Suction gripper, overhead vision
- Stock tote in, order tote out
- Pick rate not claimed yet
Robotic truck loading
A robot unloads cases from trailers; a moving-floor dock loads 6 pallets at a time.
- 1,000 cases/h per robot (target)
- 3D cameras + vacuum gripper
- 6 EUR pallets per move
Predict family
Seven device concepts for machine condition review and controlled lubrication, connected through the Predict workflow.
- Vibration, current, pressure, heat, ultrasound and oil
- GreaseNode automatic lubrication concept
- Individual power, connection and development status
Every device in the family.
VibNode is in development. Six additional concepts extend the measurements and maintenance tasks the family is designed to support.
How it all works together.
One control system, one dashboard, one site plan.
WCS software
The control system that runs every machine as one site.
- Plans moves, routes and orders
- Links to your WMS / ERP
- AI suggests, people approve
Turnkey site
One full site from inbound dock to outbound trailer, built in modules.
- Inbound, storage, picking, sorting, loading
- Add modules to grow
- Fire safety and access built in
Cold chain
Our equipment in chilled and frozen stores for food.
- Chilled and frozen zones
- Built for low temperatures
- HVAC sized for hot climates
Development stage.
We only claim what we have tested. Numbers on each page say if they are a design, a target or a market figure.
Stages, left to right: design, digital prototype, physical test, customer evaluation.
Robotic truck loading: 3D design. WCS, turnkey sites and cold chain: in design.
Built the same way.
Every machine follows the same rules, so a site is simple to run and service.
- One tote, one pallet. 600 × 400 × 280 mm totes and EUR 1200 × 800 mm pallets everywhere.
- Safety first. Risk assessment, guarding, emergency stops and safety controls are part of detailed design. Conformity assessment is required before supply; no certification is claimed here.
- Fire safety. Fire protection is coordinated with the fire engineer, insurer and local requirements for the selected goods and layout.
- Easy to service. Service zones aim to limit disruption. Adjacent operation depends on validated isolation and guarding.
- Predict inside. Condition sensing is planned where mounting, measurement quality and machine suitability are validated.
- One dashboard. A shared view of connected equipment, alarms and advisory insights, subject to the agreed interfaces.
- Modular. Add a module to grow: more levels, more aisles, more robots.
- Our logo on every part. One supplier, one point of contact.
Tell us what needs to move or be stored.
We will tell you which machines fit, and what we can test with you. Or use the contact page